Luba bolts were designed by one of New England’s super techs, professionally working exclusively on Volkswagens and Audis for over thirty-five years. Luba bolts allow you to lube outer Constant velocity joints (C/V) without dismantling the vehicle.

Directions of use:

With the car on the ground, back the center bolts off a quarter to a half of turn.

Raise the vehicle to a working height and remove the center bolt

Install Luba Bolt. Screw the mestersatz 3oz. tube (part # G000602) to the Luba Bolt.

For applications were the small end of the c/v boot has no clamp, make sure to slide a mini screwdriver between the boot and the axel on the small end of the boot to allow air to escape. Not doing so will cause the c/v to burp when removing the tool

Using needle-nose pliers, starting at end, roll tube of grease until you have use ¾ to all of the tube.

Remove tool and install new bolt, torque to specs plus a quarter turn.

Application:

Passat, two wheel and four motion

Audi, 80, 90, 100, 200, A4, A6 and A8, two wheels and quattro

 

 

To further order bolts, tubes of lube or Luba Bolts please feel free call (978) 562-6800 .

Or
eMail Us At

THANKS,

From your super-tech beetle.bug

HOME | SERVICES | PHOTOS | USED CARS | LUBA BOLTS